Quintum ITA-200 Installation Guide download pdf (Page 3)

ITA-200 Quick Installation Guide

Configuring the ITA-200

These instructions will show you how to configure the ITA-200.

Open the web browser in your PC. Enter

http://192.168.10.1 in its Address field.

Press the Enter key.

A login screen will appear. Enter the

default Username, admin and Password,

admin, in lowercase letters in the

Username and Password fields. (For

added security, you should later set a new

password in the Maintenance tab). Then

click the Login button.

Information page will appear, go to the

WAN/ LAN Configuration tab.

For the WAN/ LAN Configuration, three

connections types are offered through the

drop-down menu. Each setup screen and

available features will differ depending on

which connection type you select.

Internet Configuration Type

Automatic Configuration – DHCP: If

you are connecting through DHCP or

a dynamic IP address from your ISP,

keep this default setting. (C1)

Static: If your ISP assigns you a static

IP address, select Static IP from the

drop-down menu. Complete the

Internet IP address, Subnet Mask,

Gateway and DNS fields. You need to

enter at least one DNS address. (C2)

PPPoE: if you are connecting through

PPPoE, select PPPoE from the drop-

down menu. Complete the Username

and Password fields. (C3)

1 2 3 4 5 6

No comments

Quintum ITA-200 Installation Guide Page 3